Cisco Cisco Expressway Maintenance Manual
H.323 / SIP
status
status
Indicates the zone's H.323 or SIP connection status:
■
Off: the protocol is disabled at either the zone or system level
■
Active: the protocol is enabled for that zone and it has at least one active connection; if
multiple connections are configured and some of those connections have failed, the display
indicates how many of the connections are Active
multiple connections are configured and some of those connections have failed, the display
indicates how many of the connections are Active
■
On: applies to DNS and ENUM zones only and indicates that the protocol is enabled for that
zone
zone
■
Failed: the protocol is enabled for that zone but its connection has failed
■
Checking: the protocol is enabled for that zone and the system is currently trying to establish a
connection
connection
Search
rule status
rule status
This area is used to indicate if that zone is not a target of any search rules.
Bandwidth
Link Status
The Link status page (Status > Bandwidth > Links) lists all of the links currently configured on the Expressway, along
with the number of calls and the bandwidth being used by each link.
with the number of calls and the bandwidth being used by each link.
The following information is displayed:
Field
Description
Name
The name of each link. Clicking on a link Name takes you to the configuration page for that link.
Calls
The total number of calls currently traversing the link. Note that a single call may traverse more than
one link, depending on how your system is configured.
one link, depending on how your system is configured.
Bandwidth
used
used
The total bandwidth of all the calls currently traversing the link.
Pipe Status
The Pipe status page (Status > Bandwidth > Pipes) lists all of the pipes currently configured on the Expressway,
along with the number of calls and the bandwidth being used by each pipe.
along with the number of calls and the bandwidth being used by each pipe.
The following information is displayed:
Field
Description
Name
The name of each pipe. Clicking on a pipe Name takes you to the configuration page for that pipe.
Calls
The total number of calls currently traversing the pipe. Note that a single call may traverse more than
one pipe, depending on how your system is configured.
one pipe, depending on how your system is configured.
Bandwidth
used
used
The total bandwidth of all the calls currently traversing the pipe.
235
Cisco Expressway Administrator Guide
Overview and Status Information