Cisco Cisco 3G Wireless WAN (1xRTT, EVDO Rev A Rel 0) HWIC - Verizon
© 2014 Cisco and/or its affiliates All rights reserved. This document is Cisco Public Information. Page 20 of 23
SIM Security Guide for ISR and CGR with Verizon Wireless 4G LTE
1921_LTE(config-controller)#
exit
1921_LTE(config)#
no username SIM
1921_LTE(config)#
end
1921_LTE#
May 14 20:20:52.603: %SYS-5-CONFIG_I: Configured from console by console
May 14 20:20:52.603: %SYS-5-CONFIG_I: Configured from console by console
cellular lte sim change-pin:
c1941_DrMx#
sh cellular 0/0/0 security
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
c1941_DrMx#
### SIM is in unlock state. ###
c1941_DrMx#
c1941_DrMx#
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
c1941_DrMx#
### SIM is in unlock state. ###
c1941_DrMx#
c1941_DrMx#
cellular 0/0/0 lte sim lock 1111
!!!WARNING: SIM will be locked with pin=1111(4).
Do not enter new PIN to lock SIM. Enter PIN that the SIM is configured with.
Call will be disconnected!!!
Are you sure you want to proceed?[confirm]
c1941_DrMx#
Apr 26 21:58:11.903: %CELLWAN-2-MODEM_DOWN: Modem in HWIC slot 0/0 is DOWN
Apr 26 21:58:43.775: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/0 is now UP
c1941_DrMx#
c1941_DrMx#
Do not enter new PIN to lock SIM. Enter PIN that the SIM is configured with.
Call will be disconnected!!!
Are you sure you want to proceed?[confirm]
c1941_DrMx#
Apr 26 21:58:11.903: %CELLWAN-2-MODEM_DOWN: Modem in HWIC slot 0/0 is DOWN
Apr 26 21:58:43.775: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/0 is now UP
c1941_DrMx#
c1941_DrMx#
sh cellular 0/0/0 security
Card Holder Verification (CHV1) = Enabled
SIM Status = Locked
SIM User Operation Required = Enter CHV1
Number of CHV1 Retries remaining = 3
c1941_DrMx#
### SIM is in lock state. SIM needs to be in lock state to change it's PIN. ###
c1941_DrMx#
c1941_DrMx#
SIM Status = Locked
SIM User Operation Required = Enter CHV1
Number of CHV1 Retries remaining = 3
c1941_DrMx#
### SIM is in lock state. SIM needs to be in lock state to change it's PIN. ###
c1941_DrMx#
c1941_DrMx#
cellular 0/0/0 lte sim change-pin 1111 0000
!!!WARNING: SIM PIN will be changed from:1111(4) to:0000(4)
Call will be disconnected. If old PIN is entered incorrectly in 3 attempt(s), SIM will be blocked!!!
Are you sure you want to proceed?[confirm]
Resetting modem, please wait...
CHV1 code change has been completed. Please enter the new PIN in controller configuration for verfication
c1941_DrMx#
Apr 26 21:59:16.735: %CELLWAN-2-MODEM_DOWN: Modem in HWIC slot 0/0 is DOWN
Apr 26 21:59:48.387: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/0 is now UP
c1941_DrMx#
c1941_DrMx#
c1941_DrMx#
Call will be disconnected. If old PIN is entered incorrectly in 3 attempt(s), SIM will be blocked!!!
Are you sure you want to proceed?[confirm]
Resetting modem, please wait...
CHV1 code change has been completed. Please enter the new PIN in controller configuration for verfication
c1941_DrMx#
Apr 26 21:59:16.735: %CELLWAN-2-MODEM_DOWN: Modem in HWIC slot 0/0 is DOWN
Apr 26 21:59:48.387: %CELLWAN-2-MODEM_UP: Modem in HWIC slot 0/0 is now UP
c1941_DrMx#
c1941_DrMx#
c1941_DrMx#
sh cellular 0/0/0 security
Card Holder Verification (CHV1) = Enabled
SIM Status = Locked
SIM User Operation Required = Enter CHV1
Number of CHV1 Retries remaining = 3
c1941_DrMx#
### SIM stays in lock state, as expected, but with new PIN. ###
c1941_DrMx#
SIM Status = Locked
SIM User Operation Required = Enter CHV1
Number of CHV1 Retries remaining = 3
c1941_DrMx#
### SIM stays in lock state, as expected, but with new PIN. ###
c1941_DrMx#
cellular 0/0/0 lte sim unlock 0000
!!!WARNING: SIM will be unlocked with pin=0000(4).
Do not enter new PIN to unlock SIM. Enter PIN that the SIM is configured with.
Do not enter new PIN to unlock SIM. Enter PIN that the SIM is configured with.