Cisco Cisco 6015 IP DSL Switch Information Guide

Introduction
 Prerequisites
      Requirements
      Components Used
      Related Products
      Conventions
 Step−by−Step Procedure
 Example of Password Recovery Procedure
 Related Information

This document describes how to recover the enable password and the enable secret passwords. These
passwords protect access to privileged EXEC and configuration modes. The enable password password can
be recovered, but the enable secret password is encrypted and must be replaced with a new password. Use the
procedure described in this document in order to replace the enable secret password.

There are no specific requirements for this document.

The information in this document is based on the Cisco 6000 Family Access Concentrators.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Refer to Password Recovery Procedures for information on how to recover passwords for related products.

Refer to Cisco Technical Tips Conventions for information on document conventions.

Follow these steps in order to recover your password: