Cisco Cisco ONS 15310-MA SONET Multiservice Platform Troubleshooting Guide

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Background Information
 Launch the CTC Application from Common−Control and XTCs
      For Expert Users
      For Beginners
 Related Information

This document explains how to manually launch the Cisco Transport Controller (CTC) software from the web
browser of a user.

There are no specific requirements for this document.

The information in this document is based on all 15327 CTC software versions earlier than 3.4.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Occasionally, you can encounter problems when you launch CTC from web browsers, due to an irregularity
between the browser software and the Java " application that runs on the PC. Use these conditions to verify
whether such problems occur:

Valid IP connectivity to the IP address of the node: In order to verify the connectivity, ping the IP
address of the node with the ping IP_address command.

•