Cisco Cisco Wireless Services Module 2 (WiSM2) Troubleshooting Guide

Page of 31
Aironet 600 Series OfficeExtend Access Point
Configuration Guide
Document ID: 113003
Contents
Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Background Information
      Setup Guidelines
      Office Extend Solution Overview
 Firewall Configuration Guidelines
 Office Extend AP−600 Configuration Steps
      WLAN and Remote LAN Configuration Settings
      WLAN Security Settings
      MAC Filtering
      Supported User Count
      Channel Management and Settings
      Additional Caveats
 OEAP−600 Access Point Configuration
 OEAP−600 Access Point Hardware Installation
 Troubleshooting the OEAP−600
      How to debug client association issues
      How to interpret the event log
      When the Internet connection appears unreliable
      Additional debug Commands
      Known Issues/Caveat
 Related Information
Introduction
This document provides information on the requirements to configure a Cisco Wireless LAN (WLAN)
Controller for use with the Cisco Aironet
®
 600 Series OfficeExtend Access Point (OEAP). The Cisco Aironet
600 Series OEAP supports split mode operation and it has facilities that require configuration through the
WLAN Controller and features that can be configured locally by the end user. This document also provides
information about the configurations necessary for proper connection and supported feature sets.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco Aironet 600 Series OfficeExtend Access Point
(OEAP).