Cisco Cisco Unified MeetingPlace 5.3 Maintenance Manual

Copyright © 2004 Cisco Systems, Inc. All rights reserved.

This procedure describes how to replace the CPU for your Cisco MeetingPlace 8100 series. The CPU is 
composed of a card (located on the front of the Cisco MeetingPlace 8100 series) and a transition module 
(located in the back of the Cisco MeetingPlace 8100 series).

You must replace both the CPU card and the CPU transition module at the same time. You cannot 
replace only one.

Before replacing the CPU, ensure that you have new license keys for your 
Cisco MeetingPlace 8100 series. You must install these new license keys immediately after you 
replace the CPU.

This procedure contains the following topics:

Follow these general guidelines:

If you want information about installing the Cisco MeetingPlace 8100 series hardware for the first 
time or information about upgrading the Cisco MeetingPlace 8100 series software, see the 
Installation and Upgrade Guide for Cisco MeetingPlace Audio Server Release 5.3 at the following 
URL:

http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/audio/53/53inst/index.htm

.

If you want information about configuring the Cisco MeetingPlace 8100 series, see the 
Configuration Guide for Cisco MeetingPlace Audio Server Release 5.3 at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/audio/53/53config/index.htm

.