Cisco Cisco TelePresence MCU 4510 Release Notes
Resolved issues
Cisco TelePresence MCU 4.5(1.45) Software Release Notes
Page 6 of 16
After a failure, the diagnostic log can be retrieved via the web interface.
The improved diagnostics include:
n
Additional detail and information in the diagnostic logs.
n
More detailed event log messages.
n
Improved Cisco TAC diagnostic options in the event of system failures.
New console commands to return additional system information
This release introduces (on all MCU platforms) two new console commands that return additional system
information. The commands are:
information. The commands are:
n
show inventory
console command (previously only available on the MCU 5300 Series) returns:
l
Model
l
Serial number
n
show version
console command returns:
l
Model
l
Currently installed software version
l
Current time
l
Uptime
New/improved methods for feature key configuration
This release introduces some new/improved methods for configuring feature keys. These new methods can
be done via console command and API.
be done via console command and API.
The new console command is: feature_key list which returns a list of currently installed
feature/license keys and their expiry dates.
feature/license keys and their expiry dates.
Online Help format updated
This release introduces an updated format for the Help system and includes a table of contents to aid
navigation.
navigation.
Resolved issues
The following issues were found in previous releases and are resolved in 4.5(1.45).
Resolved since 4.4(3.67)
Identifier
Description
CSCun99662
In some circumstances an MCU 4500 Series could experience an unexpected restart while a
VNC participant was connected. This issue is now resolved.
VNC participant was connected. This issue is now resolved.
CSCun29147
Preconfigured participants that dialled back into an MCU conference after being disconnected
may not have seen the configured custom pane placement layout. This issue is now resolved.
may not have seen the configured custom pane placement layout. This issue is now resolved.
CSCug62534
In a call between an MCU 4500 and a TX9000, if the TX9000 switched the camera used to supply
video, then the video stream from the MCU showing that participant would become blurry for one
or two seconds. This issue is now resolved.
video, then the video stream from the MCU showing that participant would become blurry for one
or two seconds. This issue is now resolved.