Cisco Cisco Expressway
■
Whenever you add an extra Expressway to a cluster (to increase capacity or improve redundancy, for example)
you will need to modify any Expressways which neighbor to that cluster to let them know about the new cluster
peer.
you will need to modify any Expressways which neighbor to that cluster to let them know about the new cluster
peer.
Task 8: Configuring Traversal Zone Search Rules
To create the search rules to route calls via the traversal zone.
1.
Go to Configuration > Dial plan > Search rules.
2.
Click New.
3.
Configure the fields as follows:
Expressway-C
Expressway-E
Rule name
"Traversal zone search rule" for
example
example
"Traversal zone search rule" for
example
example
Description
"Search traversal zone - EXPe" for
example
example
"Search traversal zone - EXPc" for
example
example
Priority
100
100
Protocol
Any
Any
Source
Any
Any
Request must be
authenticated
authenticated
No
No
Mode
Any alias
Any alias*
On successful match
Continue
Continue
Target
Traversal zone
Traversal zone
State
Enabled
Enabled
* This example routes any alias across the traversal zone towards the Expressway-C. You can be more selective
by adding search rules or configuring call policy.
by adding search rules or configuring call policy.
4.
Click Create search rule.
18
Cisco Expressway-E and Expressway-C - Basic Configuration Deployment Guide