Cisco Cisco Expressway
Introduction
This document describes how to configure a single Cisco Expressway-C platform for use in a basic video
infrastructure deployment. It takes you through the following tasks:
infrastructure deployment. It takes you through the following tasks:
1.
Using the Service Setup Wizard to select the services you want to use and to apply the corresponding keys
(licenses).
(licenses).
2.
Configuring system parameters and routing information.
3.
Checking that the system is working as expected.
4.
Configuring optional items such as Cisco TMS, system logging, and access restrictions.
If your deployment includes a Cisco Expressway-E, use the Expressway-E and Expressway-C Basic Configuration
Deployment Guide on the
Deployment Guide on the
instead.
The appendices to the document provide detailed reference information, as follows:
■
.
■
web application’s online field help and page help .
Example configuration values used in this guide
For ease of reading this guide is based around an example deployment, which uses the following assumed
configuration values throughout:
configuration values throughout:
LAN1 IPv4 address
10.0.0.2
IPv4 gateway
10.0.0.1
LAN1 subnet mask
255.255.255.0
Domain name
internal-domain.net
Information in other deployment guides
This document does not describe how to deploy a clustered system, or systems running device provisioning, device
authentication, or FindMe applications, or how to configure the Expressway system for Unified Communications
services. For more details about these features, see the following documents:
authentication, or FindMe applications, or how to configure the Expressway system for Unified Communications
services. For more details about these features, see the following documents:
■
■
(includes
instructions for deploying FindMe - note that this guide is on the VCS page and not on the Expressway page)
■
page and not on the Expressway page)
7
Cisco Expressway Registrar Deployment Guide
Introduction