Cisco Cisco Expressway Maintenance Manual
Changed functionality
Access to the systemunit.xml file is now protected. Only authenticated Expressway administrator accounts can
access the file. This may affect the discovery of Expressway by Cisco TMS.
access the file. This may affect the discovery of Expressway by Cisco TMS.
Call status and call history now indicates components routed through the B2BUA for encryption or ICE support with a
component type of 'B2BUA' (formerly 'Encryption B2BUA').
component type of 'B2BUA' (formerly 'Encryption B2BUA').
Note:
The combination of having static NAT mode on and having the B2BUA engaged to do media
encryption/decryption can cause the firewall outside the Expressway-E to mistrust packets originating from the
Expressway-E. You can work around this by configuring the firewall to allow NAT reflection. If your firewall cannot
allow this, you must configure the traversal path such that the B2BUA on the Expressway-E is not engaged.
Expressway-E. You can work around this by configuring the firewall to allow NAT reflection. If your firewall cannot
allow this, you must configure the traversal path such that the B2BUA on the Expressway-E is not engaged.
X8.1.1
Unified Communications: mobile and remote access
Cisco Unified Communications mobile and remote access is a core part of the Cisco Collaboration Edge Architecture.
It allows endpoints such as Cisco Jabber to have their registration, call control, provisioning, messaging and
presence services provided by Cisco Unified Communications Manager (Unified CM) when the endpoint is not within
the enterprise network. The Expressway provides secure firewall traversal and line-side support for Unified CM
registrations.
It allows endpoints such as Cisco Jabber to have their registration, call control, provisioning, messaging and
presence services provided by Cisco Unified Communications Manager (Unified CM) when the endpoint is not within
the enterprise network. The Expressway provides secure firewall traversal and line-side support for Unified CM
registrations.
.
Support to modify Maximum transmission unit (MTU) size
You can configure the maximum transmission unit (MTU) for each network interface on the System > IP page.
Diagnostic logging
The tcpdump facility has been removed from the Diagnostic logging tool.
Jabber Guest
Jabber Guest support has been removed (it was previously provided as a feature preview in X8.1). It will be
reintroduced in a future release of Expressway software.
reintroduced in a future release of Expressway software.
Related Documentation
The following table lists documents and web sites referenced in this document, and other supporting documentation.
All documentation for the latest version of Expressway can be found at
All documentation for the latest version of Expressway can be found at
Title
Link
Expressway Administrator Guide (this document)
Authenticating Expressway Accounts Using LDAP Deployment Guide
Expressway Basic Configuration Deployment Guide
Expressway Certificate Creation and Use Deployment Guide
Cisco Unified Communications Manager with Expressway Deployment Guide
Expressway Cluster Creation and Maintenance Deployment Guide
ENUM Dialing on Expressway Deployment Guide
External Policy on Expressway Deployment Guide
Expressway CE500 Appliance Installation Guide
364
Cisco Expressway Administrator Guide