Cisco Cisco Expressway
Priority
2
Description
“Add domain where none exists” for example
Pattern type
Regex
Pattern string
([^@]*)
Pattern behavior
Replace
Replace string
\1@exp.domain
State
Enabled
4. Click Create transform.
Creating a neighbor zone for Unified CM
1. Go to
Configuration > Zones > Zones
.
2. Click New.
3. Configure the fields as follows (leave all other fields with default values):
Name
CUCM Neighbor
Type
Neighbor
Hop count
15
H.323 mode
Off (H.323 access is not required for communication with Unified CM)
SIP mode
On
SIP port
5060 (if the SIP access port on Unified CM is not 5060, change the SIP Port value
to be the same as used by Unified CM)
to be the same as used by Unified CM)
Transport
TCP
Media encryption mode
Auto
Unified CM with Cisco Expressway (SIP Trunk) Deployment Guide (X8.1)
Page 18 of 40
Configuring Expressway routing