Cisco Cisco 6015 IP DSL Switch
11
Cisco IOS Release 12.2(12)DA
alarms
You can suppress minimum bit rate alarms without disabling other alarms for the profile.
Note
The alarms command has no effect on critical alarms, major alarms, or minor alarms related to
subsystems other than the DSL subscriber ports.
subsystems other than the DSL subscriber ports.
Examples
In this example, the command enables alarms for the default profile:
DSLAM# configure terminal
DSLAM(config)# dsl-profile default
DSLAM(cfg-dsl-profile)# alarms
Related Commands
Command
Description
dsl-profile profile name
Selects an existing DSL profile for modification.
show dsl interface atm slot# /port#
Displays DSL, DMT, and ATM status for a port.
show dsl profile
Displays a specific profile, all ports to which the profile
is currently attached, and those port settings.
is currently attached, and those port settings.
show facility-alarm status
Displays the current major and minor alarm status, if any,
and display the configuration of the alarm thresholds.
and display the configuration of the alarm thresholds.