Fujifilm FUJIFILM X-E2［Ver.4.00］ Owner's Manual

To record raw, unprocessed data from the camera image sensor, select a RAW option for image qual-
ity in the shooting menu as described below. JPEG copies of RAW images can be created using the 
j RAW CONVERSION option in the playback menu, or RAW images can be viewed on a computer 
using the RAW FILE CONVERTER application (

P 115).

 Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to 

highlight 

T IMAGE QUALITY and press MENU/OK.

 Highlight an option and press MENU/OK. Select RAW to record only RAW images, or FINE+RAW or 

NORMAL+RAW to record both JPEG copy together with the RAW images. FINE+RAW uses lower 
JPEG compression ratios for higher-quality JPEG images, while NORMAL+RAW uses higher JPEG 
compression ratios to increase the number of images that can be stored.

To toggle RAW image quality on or off  for a single shot, assign RAW to a function button (

P 44).  If a JPEG option 

is currently selected for image quality, pressing the button temporarily selects the equivalent JPEG+RAW option.  
If a JPEG+RAW option is currently selected, pressing the button temporarily selects the equivalent JPEG option, 
while if RAW is selected, pressing the button temporarily selects FINE.  Taking a picture or pressing the button 
again restores the previous setting.

 

R Low- and high-gain ISO sensitivities are not available when RAW image quality is on (P 72).