Cisco Prisma II 1310 nm HDTx Transmitters Installation Guide
78-4010846-01 Rev D
Module Parameter Descriptions
A-3
Configurable Parameters
Introduction
The following table describes the configurable parameters for this module.
Parameter
Name (LCI)
ICIM
Abbrev.
Function
Values
Default
Enable Laser Enable
Turns optical amplifier on or
off.
ON or
OFF
ON
Operational
Mode
Master
Configures the module as
Master or Slave.
If set to Slave, will only start
If set to Slave, will only start
with an external alarm signal.
Master
(ON) or
Slave
(OFF)
Master
(ON)
Optical
Power
Attenuation
SetAtten
Decrease optical power.
0 dB to 3
dB in 0.5
dB steps
0 dB
Service
Mode Port A
ServiceA
Decreases optical power on
Port A to 10 dBm to allow
servicing of that port.
ON or
OFF
OFF
Service
Mode Port B
ServiceB
Decreases optical power on
Port B to 10 dBm to allow
servicing of that port.
ON or
OFF
OFF