Cisco Prisma II 1310 nm HDTx Transmitters Installation Guide
78-4010846-01 Rev D
Operation Using the ICIM
3-5
The ICIM Front Panel,
Continued
The ICIM Keypad
The ICIM keypad has twelve keys that allow you to input and monitor operational
parameters. The table below lists each key and a brief description of its function.
Button
Function
STAT
Displays status information for the selected module.
CFG
Displays configuration information for the selected module.
ALRM
Displays all of the parameters in alarm for a selected module.
Moves the menu selection area up. Also increases numerical
readings of selected configuration parameters.
Moves the menu selection area down. Also decreases numerical
readings of selected configuration parameters.
SEL
Selects the highlighted parameter.
ICIM
Displays ICIM module information such as firmware version,
serial number, and baud rate.
SHIFT
Shifts function of a keypad button to the function or number label
just above that button.
Decreases numerical readings of selected configuration
parameters.
Increases numerical readings of selected configuration
parameters.
ENTER
Enters input data (if valid).
MAIN
Exits the current menu and displays the MAIN ICIM menu.