Cisco Prisma II 1310 nm HDTx Transmitters Installation Guide
3-8
Operation Using the ICIM
78-4010846-01 Rev D
The ICIM Password,
Continued
Entering the User Password
If you wish to use the user password feature, you must create and enter a password
of exactly eight digits using only the 0-9 number keys. The password remains active
for 10 minutes after your last keystroke. If you want to change configuration
parameters after more than 10 minutes, you are required to re-enter your password.
Follow these steps to enter a user password.
Follow these steps to enter a user password.
1.
Access the Password menu as shown earlier in Accessing the Password Menu.
2.
Press the
SEL
key.
Result: The user password menu appears.
3.
When User Psw/Shift Off appears, press the
SHIFT
key to display Shift On -
then enter the eight digits of your password, using the 0-9 number keys.
If at any time you input a digit that is incorrect or you wish to change a digit,
use the CAN (Cancel) function by pressing the
If at any time you input a digit that is incorrect or you wish to change a digit,
use the CAN (Cancel) function by pressing the
ALRM
key to delete that digit.
4.
Press the
ENTER
key to enter the password.
Results:
•
•
The ICIM updates the display to show if your password entry was accepted
or rejected.
•
If the entry was accepted, you are able to return to the MAIN menu.