Cisco Headend System Release 2.7 Installation Guide
Install the Service Pack
4013154 Rev C
45
Install the Service Pack
Installing the Service Pack
1 Insert the DBDS Service Pack CD into the CD drive of the DNCS. The system
automatically mounts the CD within 30 seconds.
2 Is the File Manager window is open?
If yes, select File and choose Close, then go to step 3.
If no, go to step 3.
3 Type df -n and then press Enter. A list of the mounted file systems appears.
Note: The presence of /cdrom in the output confirms that the system correctly
mounted the CD.
mounted the CD.
4 Type /cdrom/cdrom0/install_SP -i and then press Enter. A list of packages
displays.
5 Type y and then press Enter. The software begins to install on the DNCS.
Note: The system displays a message notifying the installation engineer that
interactive mode is enabled.
interactive mode is enabled.
6 Press Enter to continue. The system displays a message that asks whether you
have backed up the DNCS host and the DNCS database.
7 Have you backed up the DNCS file systems and database?
If yes, type y and then press Enter. The system displays configuration
parameters on the screen.
parameters on the screen.
If no, type n and then press Enter.
Note: If you type n, the installation will terminate. Back up the file systems
and database and then repeat this procedure from step 4.
Note: If you type n, the installation will terminate. Back up the file systems
and database and then repeat this procedure from step 4.
8 Follow these instructions regarding the configuration parameters that are
displayed on the screen.
a Examine the configuration parameters and follow onscreen instructions to
a Examine the configuration parameters and follow onscreen instructions to
change any parameter that needs to be changed.
b Type c and then press Enter when you are finished. The installation
continues.
9 Type eject cdrom and then press Enter when the installation is complete.