Cisco Headend System Release 2.7 Installation Guide
Chapter 3 System Release 4.0 SP2 Installation Procedures
56
4013154 Rev C
Reboot the DNCS
After installing the software onto the DNCS, complete the following steps to reboot
the DNCS and Application Server.
1 If necessary, open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
the DNCS and Application Server.
1 If necessary, open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
3 From an xterm window on the Application Server, type
/usr/sbin/shutdown -g0 -y -i0 and then press Enter. The Application Server
shuts down.
shuts down.
4 From an xterm window on the DNCS, type /usr/sbin/shutdown -g0 -y -i6 and
then press Enter. The DNCS reboots and the CDE Login window appears.
5 Log on to the DNCS as dncs user.
6 At the ok prompt on the Application Server, type boot and then press Enter. The
6 At the ok prompt on the Application Server, type boot and then press Enter. The
Application Server reboots.
7 Log on to the Application Server as dncs user.
8 Go to Restart the System Components (on page 57).
8 Go to Restart the System Components (on page 57).