Cisco Cisco WAP150 Wireless-AC N Dual Radio Access Point with PoE Maintenance Manual

Policy Map

Cisco WAP150 and WAP361 Administration Guide

137

-

Committed Rate—The committed rate, in Kbps, to which traffic must 
conform. The range is from 1 to 1000000 Kbps.

-

Committed Burst—The committed burst size, in bytes, to which traffic 
must conform. The range is from 1 to 204800000 bytes.

•

Send—Specifies that all packets for the associated traffic stream are to be 
forwarded if the class map criteria is met.

•

Drop—Specifies that all packets for the associated traffic stream are to be 
dropped if the class map criteria is met.

•

Mark Class of Service—Marks all packets for the associated traffic stream 
with the specified class of service value in the priority field of the 802.1p 
header. If the packet does not already contain this header, one is inserted. 
The CoS value is an integer from 0 to 7.

For Ethernet ports of WAP361, CoS remark only takes effect in Trust 

Mode “CoS/802.1p”.

•

Mark IP DSCP—Marks all packets for the associated traffic stream with the 
IP DSCP value that you select from the list. 

-

Select From List—A list of DSCP types.

•

Mark IP Precedence—Marks all packets for the associated traffic stream 
with the specified IP precedence value. The IP precedence value is an 
integer from 0 to 7.

•

Disassociate Class Map—Removes the class selected in the Class Map 
Name list from the policy selected in the Policy Map Name list.

•

Member Classes—Lists all DiffServ classes currently defined as members 
of the selected policy. If no class is associated with the policy, the field is 
empty.

Click Save. The changes are saved to the Startup Configuration.

To delete a policy map, select it in the Policy Map Name list and click Delete.