Cisco Cisco ASA 5515-X Adaptive Security Appliance Troubleshooting Guide
ASA Multicast Troubleshooting and Common
Problems
Problems
Document ID: 115804
Contributed by Jay Johnston, Cisco TAC Engineer.
Feb 05, 2013
Feb 05, 2013
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Feature Information
PIM Sparse−mode Operation
IGMP Stub−mode Operation
Troubleshooting Methodology
Information To Collect When Troubleshooting Multicast Problems
Data Analysis
Common Problems
Related Information
Prerequisites
Requirements
Components Used
Conventions
Feature Information
PIM Sparse−mode Operation
IGMP Stub−mode Operation
Troubleshooting Methodology
Information To Collect When Troubleshooting Multicast Problems
Data Analysis
Common Problems
Related Information
Introduction
This document explains multicast capabilities of the Adaptive Security Appliance (ASA), as well as potential
problems that can be encountered when using the feature.
problems that can be encountered when using the feature.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
ASA multicast
•
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Feature Information
The ASA Command Line Configuration Guide outlines the multicast−routing feature and how to configure it:
http://www.cisco.com/en/US/docs/security/asa/asa90/configuration/guide/route_multicast.html
Multicast on the ASA can be configured in one of two modes: