Cisco Cisco DX70 Design Guide
Cisco DX Series Wireless LAN Deployment Guide
104
Wireless LAN Settings
Use the following guidelines to configure the wireless LAN profile.
• Navigate to Settings > Wireless & Networks > Wi-Fi.
• Ensure that Wi-Fi is set to On.
Ensure Wi-Fi is enabled in the Cisco Unified Communications Manager; otherwise the option will not be visible in the
settings menu.
If there is an active Ethernet connection, then Wi-Fi will be disabled and Ethernet must be disconnected before Wi-Fi
can be enabled.
settings menu.
If there is an active Ethernet connection, then Wi-Fi will be disabled and Ethernet must be disconnected before Wi-Fi
can be enabled.
• Either select the broadcasted Wi-Fi network from the list or add the Wi-Fi network manually.
• If adding the Wi-Fi network manually, select Add network then enter the SSID (case sensitive).
• Below lists the available security modes supported and the key management and encryption types that can be used for
each mode.
The key management and encryption type (cipher) will be auto-configured based on the access point’s current
configuration, where precedence is giving to the strongest key management type enabled (e.g. WPA2) then the
strongest cipher enabled (e.g. AES).
The key management and encryption type (cipher) will be auto-configured based on the access point’s current
configuration, where precedence is giving to the strongest key management type enabled (e.g. WPA2) then the
strongest cipher enabled (e.g. AES).
Security Mode
802.1x Type
Key Management
Encryption
None
N/A
None
None