Cisco Cisco 1900 2900 3900 Series 8-Port Gigabit Ethernet HS-WIC with PoE Installation Guide
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco 3G Lightning Arrestor (3G-ACC-OUT-LA)
This document describes the Cisco 3G Lightning Arrestor kit for use on Cisco wireless 3G devices and
Cisco 4G wireless devices, and provides instructions for mounting the arrestor.
Cisco 4G wireless devices, and provides instructions for mounting the arrestor.
Introduction
The Cisco 3G-ACC-LA provides a level of safety protection to the user as well as to wireless equipment
by shunting to ground over-voltage transients induced into outdoor antennas and cables. These
transients, in mild cases can produce interfering signals in a wireless system, and in extreme cases, can
be dangerous and destructive.
by shunting to ground over-voltage transients induced into outdoor antennas and cables. These
transients, in mild cases can produce interfering signals in a wireless system, and in extreme cases, can
be dangerous and destructive.
Overvoltage transients can be created through lightning static discharges, switch processes, direct
contact with power lines, or through earth currents. The Cisco 3G-ACC-OUT-LA Lightning Arrestor
limits the amplitude and duration of disturbing interference voltages and improves the overvoltage
resistance of in-line equipment, systems, and components. A lightning arrestor installed according to
these mounting instructions balances the voltage potential, thus providing safety and preventing
inductive interference to parallel signal lines within the protected system.
contact with power lines, or through earth currents. The Cisco 3G-ACC-OUT-LA Lightning Arrestor
limits the amplitude and duration of disturbing interference voltages and improves the overvoltage
resistance of in-line equipment, systems, and components. A lightning arrestor installed according to
these mounting instructions balances the voltage potential, thus providing safety and preventing
inductive interference to parallel signal lines within the protected system.
The Cisco 3G-ACC-OUT-LA Lightning Arrestor is designed for use with Cisco 3G wireless devices and
Cisco 4G wireless devices, and antennas and cables that use standard TNC connectors.
Cisco 4G wireless devices, and antennas and cables that use standard TNC connectors.
Warnings
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Statement 1001
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024