Cisco Cisco C880 M4 Server
5
C122-E176-01EN
FIGURE 1.3 Warning dialog box (example)
Confirmation dialog box
This dialog box asks the user whether to continue the operation.
FIGURE 1.4 Confirmation dialog box (example)
1.7
Basic Operations in the Web-UI Window
This section describes how to perform basic operations in the Web-UI window.
1.7.1 Access procedure
This section describes the procedure for accessing the MMB through the Web-UI.
Accessing the MMB
1. Start your Web browser.
Remarks
Both JavaScript and Download must be enabled in the browser settings.
Both JavaScript and Download must be enabled in the browser settings.
2. Enter the following URL.
TABLE 1.2 URL to be entered for login
Type
URL
Standard
http://nodename:adminport
http://nodename:adminport/login.cgi (for
Windows Server 2008)
http://nodename:adminport/login.cgi (for
Windows Server 2008)
SSL
https://nodename:adminport
Remarks
For "nodename:adminport" in the above
URL, enter the following:
nodename: Specify the FQDN or IP
address of the MMB
adminport: Specify the port number
assigned to the MMB management port
(8081 by default, and 432 for SSL)
URL, enter the following:
nodename: Specify the FQDN or IP
address of the MMB
adminport: Specify the port number
assigned to the MMB management port
(8081 by default, and 432 for SSL)
Note
If you use https for the connection and the certificate is a self-signed certificate, a warning message
appears. Ignore this message and continue the connection procedure.
3. When the MMB Web-UI login window appears, enter the user account and password. Then, click the
[Login] button.
Remarks
At initial startup or if the settings have not been changed, use the following default user account.
Remarks
At initial startup or if the settings have not been changed, use the following default user account.