Cisco Cisco Collaboration Server (CS) Maintenance Manual

Page of 440
Collaboration Server Administration Guide – Version 5.0 
Sample firewall gateway settings: 
FirewallGateway.ARM.LocalService=conn_treebeard_laptop_CMB_ARM 
FirewallGateway.ARM.RemoteService=conn_treebeard_laptop_CCS_ARM 
FirewallGateway.ARM.RMIProps=conn_treebeard_laptop.properties 
You must edit Blender.properties and uncomment the following lines to start the 
firewall gateway: 
# uncomment service1 to enable the Firewall Gateway service  
service1=Service.fwgw.properties 
Once this configuration is complete, you must stop and restart both the Collaboration 
Server and the Media Blender. 
 See Also: 
For information on  
See 
Firewallgateway.properties 
The Cisco Media Blender Administration Guide 
  
Note: For Blended Collaboration with Cisco IPCC, the ICM software, the CallManager, 
and the IP Phones must be set up and configured correctly.  The ICM software must 
have Device Targets configured according to the terminals with which the Blended 
Collaboration will be working. The CallManager must have all IP Phone terminals 
configured as well.  In addition, the ICM IPCC PG must be installed and configured to 
the correct CallManager.  
38