Cisco Cisco UCS Director 5.5 Technical References
Collect UCS Director PowerShell Agent Logs
Document ID: 119194
Contributed by Tomasz Stala, Cisco TAC Engineer.
Jul 21, 2015
Jul 21, 2015
Contents
Introduction
Problem
Solution
Problem
Solution
Introduction
This document explains how to collect the logs from Cisco Unified Computing System (UCS) Director
PowerShell Agent (Cisco PSA Service) that runs on a System Center Virtual Machine Manager (SCVMM)
machine.
PowerShell Agent (Cisco PSA Service) that runs on a System Center Virtual Machine Manager (SCVMM)
machine.
Problem
The Cisco PSA Service is responsible for inventory collection and other management functions when it is
configured to work with Cisco UCS Director software. In special cases when the problems are associated with
when you gather and send data or the connectivity issues occur between UCS Director appliance and
SCVMM, the Cisco TAC Engineers might ask you to gather additional logs for further investigation.
configured to work with Cisco UCS Director software. In special cases when the problems are associated with
when you gather and send data or the connectivity issues occur between UCS Director appliance and
SCVMM, the Cisco TAC Engineers might ask you to gather additional logs for further investigation.
Solution
By default, after you download the installer from UCS Director and execute it in the SCVMM machine, the
PowerShell Agent is installed in C:\Program Files (x86)\Cisco Systems\Cisco PSA Service\ directory. This is
an example of the folder structure:
PowerShell Agent is installed in C:\Program Files (x86)\Cisco Systems\Cisco PSA Service\ directory. This is
an example of the folder structure:
The logging information that shows the debugs and all the messages is stored in the logs/ folder: