Cisco Cisco 1900 2900 3900 Series 4-Port Gigabit Ethernet HS-WIC with PoE Installation Guide

Follow these safety instructions when installing your antenna:

Plan your installation procedure carefully and completely before you begin.

If you are installing an antenna for the first time, for your own safety as well as that of others, seek 
professional assistance. Consult your dealer, who can explain which mounting method to use for the 
location where you intend to install the antenna.

Choose your installation site with safety as well as performance in mind. Remember that electric 
power cables and telephone lines look alike. For your safety, assume that any line is an electric 
power line until determined otherwise.

Call your local power company or building maintenance organization if you are unsure about cables 
close to your mounting location.

When installing your antenna, do not use a metal ladder. Do dress properly: shoes with rubber soles 
and heels, rubber gloves, and a long-sleeved shirt or jacket.

If an accident or emergency occurs with the power lines, call for qualified emergency help 
immediately.

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a 
minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332

(Statement 372)

Do not work on the system or connect or disconnect cables during periods of lightning activity. 
Statement 1001

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the 
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection 
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. 
Statement 1030

Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry 
tub, in a wet basement, or near a swimming pool. Statement 1035