Cisco Cisco 4G LTE Enhanced High-Speed WAN Interface Card for Verizon Information Guide
© 2011-2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 5
Q. Are new commands available to configure the G.SHDSL HWICs?
A. Yes, there are new commands to configure the G.SHDSL EFM HWICs. Please refer to the configuration
manual for the EHWICs for specific commands.
http://www.cisco.com/en/US/docs/routers/access/interfaces/software/feature/guide/GSHDSL_EFM_ATM_HWI
CS.html
.
http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/SCG880-
860.html
.
Q. What is the supported MTU size?
A. It is 1940 bytes.
Q. What type of cable should I use when installing the G.SHDSL HWICs?
A. Cisco recommends you use the cable supplied with the HWIC. Part numbers are indicated in Table 3.
Table 3.
Part Numbers of the HWIC Spare Cables
Spare Cable for
Part Number
HWIC-4SHDSL-EA
CAB-RJ45-2RJ11
Printed in USA
C67-599767-02 02/12