Cisco Cisco 4G LTE Enhanced High-Speed WAN Interface Card for Verizon Installation Guide

Follow these safety instructions when installing your antenna.

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a 
minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332

This equipment must be connected to an indoor antenna only. Statement 373

Plan your installation procedure carefully and completely before you begin.

If you are installing an antenna for the first time, for your own safety as well as that of others, seek 
professional assistance. Consult your dealer, who can explain which mounting method to use for the 
location in which you plan to install the antenna.

Choose your installation site with both safety and performance in mind. Remember that electric 
power cables and telephone lines look alike. For your safety, assume that any line is an electric 
power line until determined otherwise.

Call your local power company or building maintenance organization if you are unsure about cables 
close to your mounting location.

When installing your antenna, do not use a metal ladder. Do dress properly: wear shoes with rubber 
soles and heels, rubber gloves, and a long-sleeved shirt or jacket.

If an accident or emergency occurs with the power lines, call for qualified emergency help 
immediately.

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several 
ways to obtain technical assistance and other technical resources. These sections explain how to obtain 
technical information from Cisco Systems.

You can access the most current Cisco documentation at this URL:

You can access the Cisco website at this URL:

TNC Male RA

1

1.

RA = Right angle

Heat Shrink Tube

TNC Female Straight