Cisco Cisco TelePresence MCU 4510 Installation Guide
4. Click Add user.
5. Repeat the steps for any other TelePresence MCUs.
Task 2: Configure SIP
1. Go to
Settings > SIP
.
2. Enter the following into the relevant fields, leave other fields as their default values:
Outbound call configuration
Select Use trunk.
Outbound address
This is the IP address of the Unified CM.
Outbound transport
Select TLS if using encryption otherwise select
TCP.
TCP.
Use local certificate for outgoing connections and
registrations
registrations
Check the box.
3. Click Apply changes.
Cisco TelePresence MCU Deployment Guide 4.5
Page 37 of 52
Deploying an MCU as a Unified CM media resource