Cisco Cisco TelePresence MCU 4510 Installation Guide
6. Click Save.
7. Click Reset.
Task 2: Add the MCU as a Conference bridge to Unified CM for Ad hoc
conferences
conferences
1. Go to
Media Resources > Conference Bridge
.
2. Click Add New to create a new conference bridge.
3. Enter the following into the relevant fields, leave other fields as their default values:
Conference
Bridge Type
Bridge Type
Select Cisco TelePresence MCU.
Conference
Bridge Name
Bridge Name
Enter the MCU's name.
SIP Trunk
Select from the drop-down list the SIP Trunk for ad hoc conferences created in
.
Username
Enter the username of the MCU administration user set up earlier. This appears on the
MCU's
MCU's
Administrator accounts
page (
Users > Administrator accounts
).
Cisco TelePresence MCU Deployment Guide 4.5
Page 40 of 52
Deploying an MCU as a Unified CM media resource