Cisco Cisco TelePresence MCU 4510 Installation Guide
10. Click Save.
Task 4: Add an MRGL to a Device Pool or Device
Depending on the implementation, either a Device Pool can be configured and applied to all endpoints, or an
individual device (i.e. an endpoint) can be assigned a specific MRGL. For further information on Device Pools
or Devices reference the Unified CM documentation on Cisco.com under
individual device (i.e. an endpoint) can be assigned a specific MRGL. For further information on Device Pools
or Devices reference the Unified CM documentation on Cisco.com under
To configure Media Bridge Group List (MRGL) to a Device Pool:
1. Go to
System > Device Pool
.
2. Click Add New to create a new Device pool or find a Device pool and click on it to edit an existing pool.
3. Enter the following into the relevant fields, leave other fields as their default (or previously configured)
values:
Device Pool Name
Enter a Device pool name.
Cisco Unified
Communications Manager
Group
Communications Manager
Group
Select the appropriate group from the drop-down list.
Date/Time Group
Select the appropriate group from the drop-down list.
Region
Select the appropriate region from the drop-down list.
Media Bridge Group List
Select the MRGL created in
(sub-steps 6 -10) from the drop-down list.
Cisco TelePresence MCU Deployment Guide 4.5
Page 43 of 52
Deploying an MCU as a Unified CM media resource