Cisco Cisco Prime Network Control System Appliance Release Notes
5
Release Notes for Cisco Prime Network Control System (WAN) 1.1
OL-26371-01
Related Documentation
Related Documentation
You can access the following additional Cisco Prime NCS (WAN) guides on the
page on Cisco.com:
•
(this document)
You cannot distribute a software image with the “backup running image” option selected on a device
whose running image is greater than 64 MB.
whose running image is greater than 64 MB.
An “Unresponsive Script” error appears in the Object Selector.
The Audit log export has irrelevant data in the CSV file.
Not all system jobs are not displayed for a user added to virtual domain.
No ports are displayed on the Port Grouping page for users associated to a virtual domain.
When you add a device to two virtual domains and then delete the device from one of the virtual domains,
the device is deleted from Cisco Prime NCS (WAN).
the device is deleted from Cisco Prime NCS (WAN).
After you create a dynamic group, devices that match the dynamic group’s rule are not automatically added
to the device group.
to the device group.
Bulk import failure does not show error information in the job details if the failure is caused by CSV
format errors.
format errors.
On large-scale systems, the Distribute Image and Location table hangs and the table does not completely
load.
load.
When you update the zone parameter map, the following error message is displayed: “Can't configure
threat-detection rate if threat-detection basic rate is not configured.”
threat-detection rate if threat-detection basic rate is not configured.”
In the Application Visibility feature, when you delete the AV Interface Assignment configuration from the
pending deploy list, the change is not reflected in the Cisco Prime NCS (WAN) interface.
pending deploy list, the change is not reflected in the Cisco Prime NCS (WAN) interface.
When you choose Device Work Center > Configuration > Security > ZBFW > Applications, then
assign the port to an Application, you might get the following error message “{Submitting data failed:
[INVALID:Port number [Port Value] conflicts with the system entry for [Application-Name]]}”. Any
configuration on Firewall port application table or Firewall interfaces table does not reflect on the GUI.
assign the port to an Application, you might get the following error message “{Submitting data failed:
[INVALID:Port number [Port Value] conflicts with the system entry for [Application-Name]]}”. Any
configuration on Firewall port application table or Firewall interfaces table does not reflect on the GUI.
In the Device Availability Summary dashlet, all devices are included in the device count instead of the
device count for the user domain only.
device count for the user domain only.
When you create discovery settings with SNMPv3 parameters, then edit the SNMPv3 settings, the grid
hangs and you are unable to see the results.
hangs and you are unable to see the results.
When you change the following parameters "Max-Incomplete high", “Max-Incomplete low”,
“One-Minute High”, and “One-Minute low” in Zone Based Firewall parameter map screen, you might get
an error or warning message.
“One-Minute High”, and “One-Minute low” in Zone Based Firewall parameter map screen, you might get
an error or warning message.
Table 1
Open Caveats in Cisco Prime Network Control System (WAN) (continued)
Identifier
Description