Manualsbrain.com
  1. Manuals
  2. Brands
  3. Cisco
  4. Cisco Prime Network Control System Appliance
  5. Technical Manual

Cisco Cisco Prime Network Control System Appliance Technical Manual

Download
Page of 5
Wireless Control System and Prime Network
Control System Administration with Secure
Access Control Server 5.x Configuration Example
Document ID: 116004
Contributed by Nicholas Darchis, Cisco TAC Engineer.
Apr 02, 2013
Contents
Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Configure
      Step 1. Add the WCS to the ACS AAA clients.
Step 2. Add the Cisco Secure ACS as a TACACS+ server in WCS.
      Step 3. Configure the correct shell profile on ACS.
      Step 4. Configure Cisco Secure ACS to return the attributes.
 Verify
 Troubleshoot
 Related Information
Introduction
This document describes how to use Cisco Secure Access Control Server (ACS) 5.x in order to configure
Cisco Wireless Control System (WCS) and Cisco Prime Network Control System (NCS) administration.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco Wireless Control System
• 
Cisco Prime Network Control System
• 
Cisco Secure Access Control Server
• 
Components Used
The information in this document is based on these software and hardware versions:
Cisco Wireless Control System 7.0.172.0
• 
Cisco Secure ACS 5.x
• 
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.