Cisco Cisco Wireless LAN Controller Module Leaflet

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions

MAC Address Filter (MAC Authentication) on WLCs
Configure Local MAC Authentication on WLCs
      Configure a WLAN and Enable MAC Filtering
      Configure the Local Database on the WLC with Client MAC Addresses
 Configure MAC Authentication using a RADIUS Server
      Configure a WLAN and Enable MAC Filtering
      Configure the RADIUS Server with Client MAC Addresses
      Use the CLI to Configure the MAC Filter on WLC
      Configure a Timeout for Disabled Clients
      Verify
      Troubleshoot
 Related Information

This document explains how to configure MAC filters with wireless LAN controllers (WLCs) with a
configuration example. This document also discusses how to authorize lightweight access points (LAPs)
against an AAA server.

Ensure that you meet these requirements before you attempt this configuration:

Basic knowledge of the configuration of LAPs and Cisco WLCs

• 

Basic knowledge of Cisco Unified Wireless Security Solutions

• 

The information in this document is based on these software and hardware versions:

Cisco 4400 WLC that runs software version 5.2.178.0

• 

Cisco 1230AG Series LAPs

• 

802.11 a/b/g wireless client adapter with firmware 4.4

• 

Aironet Desktop Utility (ADU) version 4.4

•