Cisco Cisco Video Surveillance 6620 IP Camera Installation Guide
4-4
Cisco Video Surveillance 6050 IP Camera Installation Guide
OL-31413-01
Chapter 4 Camera Management
Adjusting the IP Camera Viewing Angle and Focus and Completing the Installation
b.
Adjust the lens to the desired viewing angle as shown in the following figure.
c.
Tighten the two screws on the sides of the lens module so that the lens orientation remains fixed if
the camera experiences shock or vibration.
the camera experiences shock or vibration.
Step 3
While viewing video in the Home window, take these actions to fine-tune the camera focus, if needed.
The focus of the IP camera is set from 1.0 meter to infinity by default. Fine-tune the IP camera focus if
you want the device to focus on objects that are less that 1 meter from it or if its lens has lost focus.
you want the device to focus on objects that are less that 1 meter from it or if its lens has lost focus.
a.
Loosen the lens lock screw under the lens module, as shown in the following figure.