Cisco Cisco Prime Infrastructure 3.0 Technical Manual
Contents
Introduction
Prerequisites
Requirements
Components Used
Configure
Configurations
Add ACS as TACACS Server in PI
AAA Mode Settings in PI
Retrieve user role attributes from PI
Configure ACS 4.2
Verify
Troubleshoot
Introduction
This document describes the configuration example for Terminal Access Controller Access-
Control System (TACACS+)
Control System (TACACS+)
authentication and authorization on the Cisco Prime Infrastructure (PI) application.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Define PI as a client in the Access Control Server (ACS)
●
Define the IP address and an identical shared-secret key on the ACS and PI
●
Components Used
The information in this document is based on these software and hardware versions:
ACS Version 4.2
●
Prime Infrastructure release 3.0
●
The information in this document was created from the devices in a specific lab environment. All
of the devices used in this document started with a cleared (default) configuration. If your network
is live, make sure that you understand the potential impact of any command.
of the devices used in this document started with a cleared (default) configuration. If your network
is live, make sure that you understand the potential impact of any command.
Configure
Configurations