Cisco Cisco HDT Network Storage Hard Drive Trays Administrator's Guide
Managing the Shares
Configuring the NSS for FTP Access
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
117
6
Select this option if the NSS is located behind a firewall and/or router. By default,
the FTP server sets the NSS IP address to passive mode.
the FTP server sets the NSS IP address to passive mode.
NOTE
Passive Mode FTP through a router and/or firewall only works on a single interface.
If you have VLANs defined, you must choose which interface to access through FTP.
If you have VLANs defined, you must choose which interface to access through FTP.
To configure Passive Mode FTP, follow these steps:
STEP 1
From the Manager Menu, click Network
Ports.
The Network Port Configuration page appears.
STEP 2
Verify the FTP port number on the NSS (port number 21 is the default setting).
To use a non-default port number, enter the new port number in the FTP/FTPS
Server Port field (For example: 8028) and then click Update. You must also
specify this port number in your router configuration software.
Server Port field (For example: 8028) and then click Update. You must also
specify this port number in your router configuration software.