Cisco Cisco HDT Network Storage Hard Drive Trays Administrator's Guide
Adding the NSS to your Network
Configuring the Network Ports
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
33
3
The Network Diagnostics page appears.
STEP 2
Click Test for the cable you want to test.
After the test completes, the test results appear in the Link Status area. The test
results also appear on the System Status page. If the cable is in good working
condition, the link is again accessible to your users.
results also appear on the System Status page. If the cable is in good working
condition, the link is again accessible to your users.
Configuring the Network Ports
By default the NSS runs network services on their well known (IETF defined) port
numbers. You can change the port on which any particular service runs. When you
disable WAN access for a given service, only hosts on the same subnet as the
NSS may connect to that service. This is a shortcut to manually defining an
equivalent network filter.
numbers. You can change the port on which any particular service runs. When you
disable WAN access for a given service, only hosts on the same subnet as the
NSS may connect to that service. This is a shortcut to manually defining an
equivalent network filter.
To set up the network services:
STEP 1
From the Manager Menu, click Network
Ports.