Cisco Cisco HDT Network Storage Hard Drive Trays Administrator's Guide
Configuring your Storage
Deleting an Array
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
47
4
The RAID Configuration page appears.
STEP 4
Available disk drives appear in the listing. Click Add to add the disk drive to
the array.
the array.
If the disk drive is added to a functional array, the disk drive becomes a hot spare.
If the disk drive is added to a degraded array, the RAID array is rebuilt. While the
rebuild continues, the array can still be used. After the rebuild process completes,
the disk becomes part of the redundant storage. You can monitor the progress of
the rebuild through the System Status page.
If the disk drive is added to a degraded array, the RAID array is rebuilt. While the
rebuild continues, the array can still be used. After the rebuild process completes,
the disk becomes part of the redundant storage. You can monitor the progress of
the rebuild through the System Status page.
Deleting an Array
You can remove an existing array and release the disks used in the array back into
available storage. Note that deleting an array also deletes any existing data on the
array (including the volumes, shares, and quotas). If you delete an array that you
must assign a new volume as the Home Directory location.
available storage. Note that deleting an array also deletes any existing data on the
array (including the volumes, shares, and quotas). If you delete an array that you
must assign a new volume as the Home Directory location.
To delete an existing array:
STEP 1
From the Manager Menu, click Storage
RAID.