Cisco Cisco Unified MeetingPlace Express 1.2 White Paper
Cisco Systems
Network Provisioning and Configuration
Page 13
The net command is menu driven. First, choose option 4, Configure service bindings.
This lets you select the port model (described in Configuration Models). After selecting
the port model, go to the main menu and choose option 1, List current configuration.
You can change configuration parameters here.
When you quit, the net command verifies some of the settings to ensure that they are
consistent. If they are not consistent, you can correct them. After that, the net command
asks if you want to save the configuration before it exits.
Notes when using the net command:
This lets you select the port model (described in Configuration Models). After selecting
the port model, go to the main menu and choose option 1, List current configuration.
You can change configuration parameters here.
When you quit, the net command verifies some of the settings to ensure that they are
consistent. If they are not consistent, you can correct them. After that, the net command
asks if you want to save the configuration before it exits.
Notes when using the net command:
•
You can safely hit Ctrl-C to get out of the net command at any time except briefly
at the end while it is saving the configuration.
•
If you exit without saving, no changes will be permanent.
•
If you set the domain name, the net command will strip that name from the end of
the hostnames. Do not worry; it will re-append the domain when setting variables
that need a fully qualified name.
that need a fully qualified name.