Cisco Cisco TelePresence MCU 4510 Release Notes
Limitations
Cisco TelePresence MCU 4.5(1.55) Software Maintenance Release Notes
Page 12 of 17
the VNC user to upgrade to Windows 7 SP1 and apply the necessary updates. (Issue identifier
CSCun87357)
CSCun87357)
Slot 10 of the Cisco TelePresence MSE 8000 chassis does not support
clustering
clustering
Slot 10 of the Cisco TelePresence MSE 8000 chassis does not support clustering in this MCU software
release. However, slot 10 in the same chassis as a cluster can be used for a standalone blade of any type.
(Issue identifier CSCtr53874)
release. However, slot 10 in the same chassis as a cluster can be used for a standalone blade of any type.
(Issue identifier CSCtr53874)
MCU times out outbound SIP call after 64 seconds
If an outbound SIP call from an MCU takes longer than 64 seconds to connect, the MCU may time-out the
call before call set-up is complete. (Issue identifier CSCum70556) . To work around this:
call before call set-up is complete. (Issue identifier CSCum70556) . To work around this:
n
Reduce the call setup time by reconfiguring other nodes in the call path, or
n
Use H.323, which has a longer timeout. (The Cisco TelePresence VCS can interwork between H.323 and
SIP.)
SIP.)
Windows Media Player streaming only works over HTTP
Windows Media Player (WMP) streaming will work if the protocol is set to HTTP or Auto-negotiate, but there
may be a delay in connection for auto-negotiate. MMS streaming will fail, and has also been removed from
WMP 11 and onwards.
may be a delay in connection for auto-negotiate. MMS streaming will fail, and has also been removed from
WMP 11 and onwards.