Cisco Cisco Unified MeetingPlace 5.3 Quick Setup Guide
Administration Center Page References for Cisco Unified MeetingPlace
Directory Service Configuration Page
36
AXL URL
Enter https://ip-address:8443/axl/, using the Cisco Unified Communications Manager
IP address.
IP address.
When you configure this field for the initial Directory Service configuration, make sure
that you also check the
that you also check the
Update Now
and
Perform full sync with Cisco Unified
Communications Manager
check boxes.
If Cisco Unified Communications Manager fails, then you can modify this field to use a
redundant Cisco Unified Communications Manager for authentication only. You must
avoid updating or importing user profiles from the redundant Cisco Unified
Communications Manager by setting the
redundant Cisco Unified Communications Manager for authentication only. You must
avoid updating or importing user profiles from the redundant Cisco Unified
Communications Manager by setting the
Update users interval
field to the largest
available value. When you switch the
AXL URL
field back to the primary Cisco Unified
Communications Manager, you need to set the
Update users interval
field to the previous
value to re-enable user profile synchronization between Cisco Unified MeetingPlace and
the primary Cisco Unified Communications Manager.
the primary Cisco Unified Communications Manager.
Update users interval
How frequently to update the
user profiles.
Default: 6 hours
Update Now
If this is checked when you select
Save
, then an immediate Directory Service user profile
update occurs. Specifically:
•
New users are imported from Cisco Unified Communications Manager.
•
Existing user profiles in Cisco Unified MeetingPlace are updated.
Check this whenever you change the
AXL URL
, unless you are configuring RSNA
1
without Directory Service.
For details about how the user profiles are configured, see
in the
module.
Table 20
Field Reference: Directory Service Configuration Page (continued)
Field
Description