Cisco Cisco MeetingTime Quick Setup Guide

Define a technology prefix, which is stripped before checking for the zone prefix. Configure calls to hop 
off at the gatekeeper, regardless of the zone prefix in the destination address. The default-technology 
option specifies to use gateways registering with this prefix option as the default for routing any 
addresses that are otherwise unresolved. 

Router(config-gk)# gw-type-prefix type-prefix hopoff gk-zone-name default-technology 

Disable proxy communications with local terminals for calls between local and remote zones.

Router(config-gk)# no use-proxy gk-zone-name default inbound-to terminal 

Router(config-gk)# no use-proxy gk-zone-name default outbound-from terminal 

Enable the gatekeeper.

Router(config-gk)# no shutdown 

!

gatekeeper

 zone local mp2-video example.com

 no zone subnet mp2-video default enable

 zone subnet mp2-video 10.20.120.50/32 enable

 zone subnet mp2-video 10.10.1.0/24 enable

 gw-type-prefix 2#* hopoff mp2-video default-technology

 no use-proxy mp2-video default inbound-to terminal

 no use-proxy mp2-video default outbound-from terminal

 no shutdown

!

Proceed to one of the following sections in the 

 module:

Choose this configuration option if the following are true:

All H.323 video endpoints register to this Cisco IOS gatekeeper.

Cisco Unified Communications Manager provides dial plan resolution and becomes the master 
call-control point for all devices in your network.

Configure voice call control. See the 

.

Add this gatekeeper to Cisco Unified Communications Manager. For instructions on adding the 
gatekeeper, see the Cisco Unified Communications Manager online help.

You perform this task in the Cisco IOS command-line interface (CLI) of the router. For more 
information about the Cisco IOS commands used in this procedure, see the Cisco IOS Commands 
Master List for your Cisco IOS release.