Cisco Cisco Unified MeetingPlace Video Integration Installation Guide

Requirements for This Configuration 

This document provides instructions for installing and configuring the simplest possible deployment of Cisco Unified 
MeetingPlace Video Integration. 

Other configurations are supported but not documented here. 

For this installation, these instructions assume your environment meets the following conditions: 

If you have already attempted this installation, uninstall everything and undo changes you have made before 
reinstalling following these instructions. 

You have not yet begun to install and configure this application. 

Your equipment meets the requirements described in the system requirements and compatibility matrix documents at 

. 

Your equipment complies with the limitations, restrictions, and other information in the Release Notes for Cisco Unified 
MeetingPlace Video Integration, available from 

The following restrictions apply for the configuration described in this document only. They do not necessarily apply to all 
deployments. 

There is a single Cisco Unified Communications Manager or Cisco Unified CallManager that is set up and can route calls 
properly. 

There is a single Cisco IOS Gatekeeper (plus one internal ECS gatekeeper that is installed with this application). 

All components are installed at the same geographic location and are on the same network. 

There are no bandwidth bottlenecks between devices on your network. 

This deployment needs to support only IP resources, no ISDN or PSTN resources. 

You have a Network Time Protocol (NTP) server to which you can synchronize all servers in this deployment. 

The Cisco Unified MeetingPlace system (release 5.4 or 6.0) has only one audio server. 

The Cisco Unified MeetingPlace system is licensed for video conferencing. 

The web conferencing servers are not configured for DMZ access. 

The Microsoft Outlook and Lotus Notes integrations are not used. 

Calls are routed via a Cisco Unified MeetingPlace H.323/SIP IP Gateway. 

The audio system includes only IP phones. 

One Cisco Unified Videoconferencing Multipoint Control Unit (MCU), model 3515 or 3545, release 5.x. 

All video endpoints are H.323 endpoints or desktop cameras associated with the primary phone number configured for each 
user in Cisco Unified MeetingPlace. 

There are no high-definition endpoints.