Cisco Cisco IPICS Release 1.0 Technical Manual
Proceed with the password prompt as previously configured. Once connected, click the “Read” icon
from the toolbar. Click “Ok” if the CSS warns about overwriting a previously loaded configuration. This
will load the configuration for the selected fixed station.
from the toolbar. Click “Ok” if the CSS warns about overwriting a previously loaded configuration. This
will load the configuration for the selected fixed station.
Click the “Product” icon from the toolbar. Then select “Base Station” and click “Ok”. This is the only way
to enable DFSI operation for the fixed station. Otherwise the DFSI link on the navigation bar on the left is
disabled.
to enable DFSI operation for the fixed station. Otherwise the DFSI link on the navigation bar on the left is
disabled.
Click on the “DFSI” link on the navigation bar to display the current configuration. To enable DFSI
operation, do the following:
operation, do the following:
Check the “DFSI Interface” checkbox.
For the “Control service port number”, enter 50000.
Make sure that the “Use control service IP address” checkbox is checked.
Enter the IP address of this fixed station,
For the “Control service port number”, enter 50000.
Make sure that the “Use control service IP address” checkbox is checked.
Enter the IP address of this fixed station,