Cisco Cisco Meeting Server 1000 Developer's Guide
Cisco Meeting Server Release 2.0 : MMP Command Line Reference
23
6 Commands for Configuring the Cisco Meeting
Server
Server
Command/Examples
Description/Notes
health
Displays temperatures, voltages and other health
information about the Meeting Server.
information about the Meeting Server.
Note: The health command is not available on a
virtualized deployment.
virtualized deployment.
uptime
Displays the time since the Meeting Server was last
rebooted
rebooted
shutdown
Powers off the Meeting Server when you enter Y in
response to the prompt. After using the shutdown
command, an Acano X-Series Server can then be
powered off.
response to the prompt. After using the shutdown
command, an Acano X-Series Server can then be
powered off.
hostname <name>
hostname mybox.mydomain
Sets the hostname for the server.
Note: A reboot is required after issuing this command.
timezone
Displays the currently configured timezone
timezone <timezone name>
timezone Europe/London
Sets the time zone for the Meeting Server. The
Meeting Server uses the standard IANA time zone
database. See this
Meeting Server uses the standard IANA time zone
database. See this
Note: A reboot is required after issuing this command.
timezone list
Prints a full list of the available timezones.
Note: if you choose to use the timezone with offset
from GMT, Etc/GMT<offset>, the offset uses POSIX-
style signs. As a consequence the timezone for Hong
Kong is Etc/GMT-8, and NOT Etc/GMT+8.
from GMT, Etc/GMT<offset>, the offset uses POSIX-
style signs. As a consequence the timezone for Hong
Kong is Etc/GMT-8, and NOT Etc/GMT+8.
ntp server add|del <host>
Configures/deletes an NTP server. <host> can be a
name or IP address
name or IP address
ntp status
Checks the status of the NTP servers
ntp server list
Display a list of configured NTP servers
ntp groupkey <keyfile>
Adds an NTPv4 group key for autokey support
ntp autokey (enable|disable)
Enables or disables autokey support
ntp groupkey group.key
ntp autokey enable
For example, a group key file can be uploaded using
SFTP to "group.key" and configured with these
commands.
SFTP to "group.key" and configured with these
commands.
date
Displays the current system (in UTC) and local time
6 Commands for Configuring the Cisco Meeting Server