Cisco Cisco ScanSafe Wi-Fi Hotspot Security White Paper
Cisco CWS
– WSA Deployment Guide
5
Test
Deploy
Prepare
Deploy
Configure WSA Connector
This document is intended to provide an overview of the deployment process. For more detailed
information and troubleshooting, please refer to the
information and troubleshooting, please refer to the
Typically when configuration changes are submitted on the WSA they are not immediately committed.
When you see the yellow Commit Changes button appear in the upper right after making a configuration
change, you must click it and then you will be presented with an option to commit the change with notes
or abandon the changes. Please be sure to commit your changes as you complete the recommended
configurations in this guide.
When you see the yellow Commit Changes button appear in the upper right after making a configuration
change, you must click it and then you will be presented with an option to commit the change with notes
or abandon the changes. Please be sure to commit your changes as you complete the recommended
configurations in this guide.
Figure 2.1
Run the System Setup Wizard
Step 1:
Logon to the WSA/WSAv appliance. Default credentials are:
Username
– admin
Password
– ironport
Figure 2.2
Step 2:
To begin setup, select System Administrator > System Setup Wizard