Cisco Cisco ScanSafe Wi-Fi Hotspot Security Release Notes
Table 1: Recommended Minimum Hardware by Operating System
Maximum rate (requests
per second)
per second)
Maximum thread count
RAM
CPU
Operating System
3,500
2,800
8 GB
Quad Core Xeon, 2.50
Ghz
Ghz
RHEL/CentOS 6 (32-bit
x86 and 64-bit x64)
x86 and 64-bit x64)
3,500
2,800
8 GB
Quad Core Xeon, 2.50
Ghz
Ghz
RHEL/CentOS 5 (32-bit
x86 and 64-bit x64)
x86 and 64-bit x64)
3,500
2,500
8 GB
Quad Core Xeon, 2.50
Ghz
Ghz
Windows Server 2012
R2 (64-bit x64)
R2 (64-bit x64)
3,500
2,500
8 GB
Quad Core Xeon, 2.50
Ghz
Ghz
Windows Server 2008
R2 (64-bit x64)
R2 (64-bit x64)
3,500
2,500
8 GB
Quad Core Xeon, 2.50
Ghz
Ghz
Windows Server 2008
(32-bit x86 and 64-bit
x64)
(32-bit x86 and 64-bit
x64)
Performance testing was run with mixed traffic (HTTP+HTTPS) using a ratio of 85% HTTP and 15%
HTTPS with average response size of 254423 bytes and maximum response size of 4130206 bytes.
HTTPS with average response size of 254423 bytes and maximum response size of 4130206 bytes.
Note
Increasing RAM above 8 GB will not increase maximum thread count or maximum rate.
Note
Download the Latest Version
Follow these steps to download the latest version of Cisco Cloud Web Security Connector software.
Before You Begin
You must be a registered user of Cisco Cloud Web Security.
Step 1
Follow this link to log in to Cisco ScanCenter:
Step 2
Enter your Cisco Cloud Web Security credentials.
Step 3
Click the Admin tab.
Step 4
In the Downloads menu, click the required version of Connector (Windows or Linux).
Step 5
Follow the instructions in the
to install and configure the package.
Release Notes for Cisco Cloud Web Security Connector, Release 3.X
2
System Requirements
Download the Latest Version