Cisco Cisco ASR 920-4SZ-D Router Licensing Information
10G ports
1G ports
Cisco ASR 920 Series
models
models
Without license: With no 10G licensed installed, the
ports Te0/0/24 – Te0/0/27 cannot be used. They remain
in "admin-down" state and cannot be activated using
the no shutdown command.
ports Te0/0/24 – Te0/0/27 cannot be used. They remain
in "admin-down" state and cannot be activated using
the no shutdown command.
With license: After you install and activate the license
with single bundle count, ports Te0/0/24 – Te0/0/25
are activated. The remaining ports will be in
"admin-down" state.
with single bundle count, ports Te0/0/24 – Te0/0/25
are activated. The remaining ports will be in
"admin-down" state.
When you install the second bundle license (bundle
count=2), all TenGig ports (Te0/0/24 – Te0/0/27) are
activated.
count=2), all TenGig ports (Te0/0/24 – Te0/0/27) are
activated.
Without License: The ports Gi0/0/0 – Gi0/0/11
are non-licensed. The licensed ports Gi0/0/12
– Gi0/0/23 are in "admin-down" state, that is,
the ports are in shutdown state. You cannot
activate the interface using the no shutdown
command.
are non-licensed. The licensed ports Gi0/0/12
– Gi0/0/23 are in "admin-down" state, that is,
the ports are in shutdown state. You cannot
activate the interface using the no shutdown
command.
With License: After you install and activate the
license with single bundle of six 1G ports, the
ports Gi0/0/12 – Gi0/0/17 are activated. If you
install the license with second bundle of six 1G
ports, all ports Gi0/0/12 – Gi0/0/23 are
activated.
license with single bundle of six 1G ports, the
ports Gi0/0/12 – Gi0/0/17 are activated. If you
install the license with second bundle of six 1G
ports, all ports Gi0/0/12 – Gi0/0/23 are
activated.
ASR-920-24SZ-IM
ASR-920-24SZ-M
, ASR-920-24TZ-M
Without License: The licensed ports Te0/0/12 -
Te0/0/15 operate in 1G mode.
Te0/0/15 operate in 1G mode.
With License: After you install and activate the 10G
license with single bundle count, ports Te0/0/12 –
Te0/0/13 are activated and will work in 1G or 10 G
mode based on SFP type. The remaining ports will
operate in 1G mode if you have a valid 1G license.
license with single bundle count, ports Te0/0/12 –
Te0/0/13 are activated and will work in 1G or 10 G
mode based on SFP type. The remaining ports will
operate in 1G mode if you have a valid 1G license.
When you install the second bundle license (bundle
count=2), all TenGiabotEthernet ports (Te0/0/12 –
Te0/0/15) are activated and work in 1G or 10G mode
based on the SFP type.
count=2), all TenGiabotEthernet ports (Te0/0/12 –
Te0/0/15) are activated and work in 1G or 10G mode
based on the SFP type.
Without license: The licensed ports Gi0/0/0 -
Gi0/0/11 are "admin-down", that is, licensed
ports are in Shutdown state. You cannot activate
the interface using the no shutdown command
on the licensed ports unless you have the valid
1 GigabitEthernet Upgrade license/Bulk license
installed and activated.
Gi0/0/11 are "admin-down", that is, licensed
ports are in Shutdown state. You cannot activate
the interface using the no shutdown command
on the licensed ports unless you have the valid
1 GigabitEthernet Upgrade license/Bulk license
installed and activated.
With License: After you install and activate the
license, then the licensed ports Gi0/0/0 -
Gi0/0/11 come out of "admin-down" state, and
will be Up or Down state based on the
connection.
license, then the licensed ports Gi0/0/0 -
Gi0/0/11 come out of "admin-down" state, and
will be Up or Down state based on the
connection.
ASR-920-12SZ-IM
Bulk Port License
Bulk port licensing allows you to enable all the ports with a single license. When Bulk port license is activated, even while the 1
GigabitEthernet or 10 GigabitEthernet Upgrade Licenses are in use, there is no impact on the corresponding interfaces. The existing
1 GigabitEthernet or 10 GigabitEthernet Upgrade Licenses are released.
GigabitEthernet or 10 GigabitEthernet Upgrade Licenses are in use, there is no impact on the corresponding interfaces. The existing
1 GigabitEthernet or 10 GigabitEthernet Upgrade Licenses are released.
• Bulk port license for enabling all licensed ports on ASR-920-12CZ models
◦ASR920-12G-2-10G—Enables six 1G combo ports and upgrades two 10G SFP+ ports to operate in 10G mode.
• Bulk port license for enabling all licensed ports on ASR-920-4SZ models
◦ASR920-2G-4-10G—Enables all four SFP+ ports to operate in 10G mode.
• Bulk port license for enabling all licensed ports on ASR-920-10SZ-PD models
◦ASR920-10G-2-10G—Enables six 1G ports and upgrades the two 10G SFP+ ports to operate in 10Gmode.
• Bulk port license for enabling all licensed ports on ASR-920-24SZ-IM, ASR-920-24SZ-M, and ASR-920-24TZ-M models
◦ASR920-24G-4-10G—Enables all SFP (12-23) and SFP+ (24-27) ports
7