Fujifilm Uvijet KI Product Datasheet
Uvijet KI
UV Curing Ink System for Acuity Advance & Select Inkjet Printer
PRODUCT INFORMATION
Features
• Conventional UV ink system
• Outstanding adhesion range
• Superb flexibility on roll fed media
• Excellent finishing properties, bending, creasing,
• Outstanding adhesion range
• Superb flexibility on roll fed media
• Excellent finishing properties, bending, creasing,
routing, guillotining
• Fast cure for high production output
• Intense colours with a wide colour gamut
• Recommended for both internal and external
• Intense colours with a wide colour gamut
• Recommended for both internal and external
applications
• Suitable for decoration of uneven substrates
Ink Properties
The Uvijet KI ink range is a high quality UV curable
inkjet system designed for piezo drop-on-demand
printheads. The ink has been specially developed for
the Acuity Advance and Select printers and offers
excellent dot reproduction, light-fast, bright colours and
will adhere to a range of rigid and flexible uncoated
materials.
inkjet system designed for piezo drop-on-demand
printheads. The ink has been specially developed for
the Acuity Advance and Select printers and offers
excellent dot reproduction, light-fast, bright colours and
will adhere to a range of rigid and flexible uncoated
materials.
Colour Range
KI052
Yellow
KI867
Magenta
KI215
Cyan
KI004
Black
Supplied in 2 litre sealed pouches
KI021
KI021
White
Supplied in 1 litre sealed pouches
QV017 UV Flush
ZE720 Fusion Adhesion Master
Available in 1 litre containers.
QV017 UV Flush
ZE720 Fusion Adhesion Master
Available in 1 litre containers.
Application Range
Uvijet KI inks are specifically formulated to maximise
the performance of the Fujifilm Acuity Advance UV
curing printers. These printers accept rigid and flexible
materials up to 48mm thick and Uvijet KI inks are
designed to decorate a wide range of uncoated media.
For certain media, however, it is possible to further
improve the adhesion with the use of Uvijet Fusion
Primers.
the performance of the Fujifilm Acuity Advance UV
curing printers. These printers accept rigid and flexible
materials up to 48mm thick and Uvijet KI inks are
designed to decorate a wide range of uncoated media.
For certain media, however, it is possible to further
improve the adhesion with the use of Uvijet Fusion
Primers.
THE END USER MUST DETERMINE THE
SUITABILITY OF THIS PRODUCT FOR THE
INTENDED USE PRIOR TO PRODUCTION.
SUITABILITY OF THIS PRODUCT FOR THE
INTENDED USE PRIOR TO PRODUCTION.
Media Type
Adhesion Characteristics
Poster Display
Display Board
Non Corrugated Board
Foam Centred Board
PVC Foam Board
Acrylic
Glass
Styrene
Self-adhesive PVC
Gloss Rigid PVC
Fluted Polypropylene
ZE720 can improve to
Polyethylene
ZE720 can improve to
Polycarbonate
Coated Banner Vinyl
Canvas (to stretch)
Digital Dibond
Excellent Good Fair Poor
Curing
Excellent cure and adhesion are achieved immediately
upon print and UV curing. However, maximum
adhesion, chemical, scuff and scratch resistance may
not be obtained until 24 hours after initial curing.The
actual level of cure will depend upon ink thickness,
substrate and the UV curing lamps being used.
Superior through cure may be obtained by reducing the
print speed by selection of an alternative print mode to
increase the overall UV dose.
upon print and UV curing. However, maximum
adhesion, chemical, scuff and scratch resistance may
not be obtained until 24 hours after initial curing.The
actual level of cure will depend upon ink thickness,
substrate and the UV curing lamps being used.
Superior through cure may be obtained by reducing the
print speed by selection of an alternative print mode to
increase the overall UV dose.
Pre-production Tests
Uvijet KI ink is formulated to give good adhesion to
most major brands of plastic and polyethylene
materials. Polyolefins should have a surface energy
level of 42 dynes/cm or higher. For certain applications
most major brands of plastic and polyethylene
materials. Polyolefins should have a surface energy
level of 42 dynes/cm or higher. For certain applications